EcoTherm
EcoTherm Insulation
EcoTherm is a high performance range of insulation solutions for the entire building envelope.
EcoTherm Insulation comprises a rigid thermoset polyisocyanurate (PIR) core sandwiched between two high performance facings to create a tough, durable, light weight insulation board that performs whilst reducing the overall cost to build.
- For Walls
- For Floors
- For Ceilings
- For Roofs
Have any questions? call us today!
0121 720 0694
sales@studandtrack.co.uk
Product Description
EcoTherm is a high performance range of insulation solutions for the entire building envelope.
Eco-Cavity
1200mm x 450mm
Eco-Cavity is available in the following thicknesses: 50-100 mm.
Eco-Cavity is a partial fill cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity is ideal for use with masonry walls and can achieve good levels of thermal performance in thinner constructions whilst maintaining a clear residual air gap.
Product Highlights
Suitable for use within partial fill cavity walls
Air gap between the insulation and masonry outer leaf acts as a barrier to external moisture penetration
Lightweight insulation – easy to transport
High Performance rigid polyisocyanurate (PIR) insulation core
Aluminium composite foil facing to both sides
Eco-Cavity Full Fill
1200mm x 450mm
Eco-Cavity Full Fill is available in the following thicknesses: 90 mm, 115 mm and 140 mm.
Eco-Cavity Full Fill is a cavity wall insulation board with a thermal conductivity of 0.022 W/mK. Eco-Cavity Full Fill is ideal for use with masonry walls and is suitable where the requirement is for insulation to completely fill the cavity, whilst maintaining a residual 10 mm cavity to resist moisture transfer.
Product Highlights
Suitable for use in full fill cavity wall applications, allowing for optimal thermal performance to be met.
Tongue and groove edges allow for easy installation
Lightweight insulation – easy to transport
High performance rigid polyisocyanurate (PIR) insulation core
Aluminium composite foil facing to both sides
Eco-Versal
2400mm x 1200mm
Eco-Versal is available in the following thicknesses: 25-150 mm.
Eco-Versal is a 5 in 1 insulation board with a thermal conductivity of 0.022 W/mK. It is suitable for a number of different applications, including cold flat and pitched roofs, floors and timber frame construction. Eco-Versal can also be used to upgrade insulation on most internal and external walls.
Product Highlights
A 5 in 1 solution that’s suitable for insulating floors, walls, roofs, dormer cheeks and ceilings
Rigid insulation board with a thin profile that’s easy to cut and install
Lightweight insulation – easy to transport
High performance rigid polyisocyanurate (PIR) insulation core
Aluminium composite foil facing to both sides
Eco-Liner
2400mm x 1200mm
Eco-Liner is available in the following thicknesses: 37.5 mm – 82.5 mm (insulation + plasterboard).
Eco-Liner is an insulated plasterboard for mechanically fixed & adhesively bonded drylining systems. The insulation component has a thermal conductivity of 0.022 W/mK. This 2 in 1 board insulates and finishes walls in one application. Eco-Liner is an ideal insulation product for internal walls and pitched roofs.
Product Highlights
A 2 in 1 solution for insulating and drylining walls in one application, meaning only one board to cut, carry and fix
High performance rigid polyisocyanurate (PIR) insulation core with a tapered edge 12.5mm gypsum plasterboard
Ideal for room-in-the-roof applications, walls and cold flat roofs
Insulation component thermal conductivity of 0.022 W/mK
Inno-Torch
Inno-Torch is available in the following thicknesses: 30 mm – 150 mm (1200 mm x 600 mm boards)
Inno-Torch flat PIR boards offer a thin and durable insulation solution for flat roofs. The boards are suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks. With thermal conductivities as low as 0.024 W/mK, Inno-Torch boards can allow you to achieve target U-values with slim constructions.
Product Highlights
Can be fitted with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems
Suitable for use on new and existing concrete, timber and metal decks
Lightweight PIR insulation boards are easy to transport, cut and install
Inno-Bond
Inno-Bond is available in the following thicknesses:
25 mm (1200 mm x 600 mm boards)
50 – 150 mm (1200 mm x 1200 mm boards)
160 mm (1200 mm x 2400 mm boards)
Inno-Bond flat roof boards offer a lightweight, durable solution for new and existing flat roofs with a thermal conductivity as low as 0.024 W/mK. Inno-Bond flat roof boards are suitable for use with fully adhered single-ply waterproofing systems on concrete, metal and timber decks. Inno-Bond flat PIR roof insulation boards deliver excellent thermal performance, helping to hit target U-values with slim constructions.
Product Highlights
Compatible with new and refurbished roofs
Can be fitted under fully adhered, single-ply membranes
Suitable for use on concrete, timber and metal decks
Rigid boards are easy to transport, cut and install
Inno-Bond
2400mm x 1200mm
Inno-Fix is available in the following thicknesses: 25-160 mm
Inno-Fix PIR insulation boards offer a simple, lightweight solution for use on new roofs or to upgrade the thermal performance of existing roofs. The rigid boards are specifically designed for use with single-ply waterproofing membranes on concrete, metal or timber decks, achieving a thermal conductivity of 0.022 W/mK.
Product Highlights
Designed for use with mechanically fixed single-ply membranes
Compatible with new and refurbished roofs
Suitable for use on concrete, timber and metal decks
Rigid boards are easy to transport, cut and install